Lexar JumpDrive TwistTurn is a high-capacity USB flash drive that provides a convenient solution for storing, transferring, and sharing multimedia and more. Lexar JumpDrive TwistTurn is available in 16GB, 32GB, and 64GB capacities. Do Not Load System Files: Check the checkbox next to “Do Not Load System Files” before formatting with the Lexar USB Format tool. You only need to load system files if you want to be able to boot from your USB. Lexar USB Format is a free program for the Microsoft Windows operating system that you can use to partition USB Flash Drives. Wide-Format Paper; See all Paper. Enter Zip Code. Lexar JumpDrive S75 64GB USB 3.0 Encrypted Secure Drive (LJDS75-64GABNLS).

Previously, we showed you how to format a USB drive on Windows 10. The process is very straightforward and shouldn’t take more than a minute to complete. After formatting, you are supposed to get this success message:

Lexar Usb Format Tool

But, there may be times when Windows cannot format your flash drive. For example, you plug your drive into the port of a PC, you right click on the disk icon and select “Format”, but it popped up an error saying “Windows was unable to complete the format”.

Other times you may see this message: “The disk is write protected”…So, what’s wrong? Does that mean your USB drive is broken?

Not really!

Kingsman the secret service 1080p. Watch kingsman the secret service 2014 online free on putlocker in high quality HD 1080p, HD 720p, Putlocker official site moved to putlocker9.es. Genre: Action, Adventure, Comedy. Actor: Adrian Quinton, Colin Firth, Mark Strong, Jonno Davies, Sofia Boutella. Director: matthew vaughn.

In this article, we are going to show you how to fix this weird Windows not formatting error. All you need to do is follow the step-by-step instructions below.

Let’s get started.

Typical Errors When USB Can’t Be Formatted on Windows

Depending on the operating systems (Windows 10, 8, 7, Vista, XP) you are using, the error messages may vary from case to case. Here are the common ones:

  • The disk is write protected.
  • The USB disk is not formatted, do you want to format it now?
  • The USB drive is not initialized.
  • The operation did not complete because the media is write protected.
  • There is no disk in the drive. Insert the disk and then try again.
  • Windows refuses to format your USB key or access files.
  • Other force format error messages.

The possible causes for those formatting errors also vary. For example, the flash drive is corrupted due to improper ejection or an unexpected PC shutdown. There might also be compatibility issues between your flash drive and the PC.

Lexar Usb Software

Another common reason for that is file system error. For example, normally a new flash drive is initiated with FAT-32. It’s possible that you (or the person who uses it) might have reformatted it into NTFS or another file system.

Why file system matters?

You might wonder. We’d like to use an analogy a reader shared with us earlier.

A flash drive is essentially like a book, the data is the words in the book, the format is the paper that the words are printed on – different book publishers use different kinds of paper.

Now you understand. Let’s go back to the topic.

Before Formatting Your USB Drive

Make sure that you’ve already backed up the data stored on your flash drive. If you haven’t done so and the files stored inside are important to you, try using a data recovery software to see if it helps. Just connect your USB drive to the PC, then let a recovery program scan your USB drive to seek any recoverable items.

Also Read: Complete Guide to USB Flash Drive Data Recovery

Also, if you happen to have access to another computer, the first attempt you should take is try inserting the USB drive to that PC and then see if the drive can be accessed or formatted successfully. Sometimes this helps clear the compatibility or buffer issues. If that doesn’t help, follow the guide below.

How To Fix When Windows Was Unable to Complete The Format

Simply put, you go to Disk Management and re-format the drive. Here’s how to do it:

  1. Insert your flash drive into a PC.
  2. Move the cursor to the bottom left corner. Right-click on the Windows icon.
  3. Select Disk Management.
  4. Highlight the disk your flash drive represents, right click and choose New Simple Volume.
  5. Now select the formatting options, make sure under File System you choose FAT-32 or exFAT.
  6. Click “Next” to complete the rest procedure.

If this doesn’t work out, use the command line to initiate the drive. This video has more:

How To Format USB When Windows Says Disk Is Write Protected

Note: our PC is running Windows 10 thus all the screenshots below are taken based on Windows 10. If you’re on Windows 8.1, 7, Vista, or XP, they will look slight different.

Step 1: In the search bar, type “regedit” and click the regedit app icon to run it.

Step 2: In Registry Editor, go to HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Control.

Step 3: Right-click Control folder, select New > Key.

Step 4: Now rename the New Key #1 folder into StorageDevicePolicies.

Step 5: Right-click on StorageDevicePolicies folder, select New, and QWORD (64-bit) Value if your PC is running with a 64-bit version, or DWORD (32-bit) Value if it’s with 32-bit.

Hint: see this Microsoft article to check whether your computer is running a 32-bit version or 64-bit version.

Step 6: Now rename the New Value #1 folder into WriteProtect.

Step 7: Double click the WriteProtect folder, change the Value data: into “0” and Base to “Hexadecimal”, click “OK.”

Step 8: Close RegEdit by clicking the “X” icon.

Step 9: Open “This PC” (Windows 10) or “My Computer” (Windows Vista/XP), and refresh it 5 times without doing anything to your USB drive, and properly eject the flash drive.

Step 10: Now plug your USB drive again into your computer and format it to exFAT instead of FAT32.

Done!

Still Didn’t Work?

It’s time to use a third-party utility. We recommend this one called HP USB Disk Format Tool, a program also recommended by SanDisk actually (see here).

The update will begin to load 7. When it prompts for the 2nd USB&DVD, take out the USB drive and repeat step 3-4 but with the config.nfm and pkgdb in USB&DVD-2 folder 8. Re-insert USB into the glovebox and allow it to continue updating 9. When it prompts for the 3rd and 4th USB&DVD, repeat the same step 7-8 but with the config.nfm and pkgdb in USB&DVD-3 and USB&DVD-4 folders 10. Bmw fsc code keygen crack serial generator download.

First off, you need to download the utility from CNET. Then, install the utility on your Windows PC. Run the program and follow the tutorial in this video.

Note: Using the HP USB Disk Storage Format Tool will restore your flash drive to the original capacity and every bit of data will be erased permanently.

One more thing: USB flash drives are easy to go wrong, if you have important files to save, it’s best to use an external drive for backup and storage. Because it’s more reliable.

So that’s all we wanted to share in this article. How do you like this troubleshooting guide? Have you managed to fix the Windows unable to format USB?

Let us know which formatting method worked for you, or which step you are stuck in.

Either way, leave a comment below.

Lexar Usb Format Zip Codes Free

Influenced by the startup culture in the Silicon Valley, Jessica loves building things from zero to one and is keen on following news related to the Big Five tech giants and many SaaS startups.